If you have thought about building a waterfall for your pond, then follow the tips below. Basically there are two ways of building a waterfall for your pond. If you have an existing pond then adding a waterfall may be a challenge because of redirecting your water supply, but if you are building a new pond this will make it much easier. First, let us look at a pre-existing pond. First you must locate your waterfall- you must pick an area of your pond that you think will look good with a waterfall dropping over the edge. After locating you must now decide how high it will be- the rule for sizing a water fall is based on how big your pond is. A large waterfall will not look good in a small pond and the same for large pond, a large pond should have a larger waterfall. If your pond uses a rubber liner or preformed liner this tip will work for both- you will want to build up an area close to the edge of your pond using first small stones. Outline your waterfall, by matching the ston...